Our Space Saver models are designed to fit in tight spaces. Ideal for condominiums, apartments, cottages, low crawl spaces, small basements and anywhere space is limited.
We offer two Space Saver models. One is standard-a-lone water softener. Our second model is a combination water and whole house filter, designed to remove water hardness, Chlorine, taste, odors and harmful chemical.
Major components of our Space Saver water softeners include our Signature Series metered control valve, designed to provide greater efficiency, by-pass valve to isolate the unit if necessary, pipe fittings, pressure tank, the cabinet which contains the salt bin, ion exchange resin, gravel under bedding to provide even flow distribution, riser tube with bottom distributor and water softener salt, used to strip hardness minerals from the resin beads.
The process whereby hardness minerals are removed from your water is described below:
As water flows through the resin bed, hardness minerals are removed by the ion exchange resin. Eventually, however, the resin reaches its capacity and must be cleaned. This process is called, “regeneration”.
Signature Series valves are metered, which calculates when this cleaning process must occur.
This cleaning process is described as follows:
|Dimensions||12 wide; 20" deep; 44-1/2" height|
|Pipe fittings available||¾", 1" and 1.25|
|Regeneration method||Down flow|
|Riser tube size||1.05"|
|Drain line fitting||¾" male NPT|
|Drain line tubing||½" or ¾"|
|Brine line||3/8" quick connect|
|Supply voltage||120 V AC|
|Supply frequency||60 Hz|
|Output voltage||12 V AC|
|Operating pressure||20 psi to 125 psi|
|Operating temperature||40°F to 110°F|
|Volume (cubic feet)||1|
|Resin type||8% cross-linked|
|Carbon type (carbon/resin model)||Granular coconut shell carbon (12x40)|
|Brine tank volume||120 lbs. maximum|
|Brine tank overflow||Overflow prevention device Included|
|Model Number||Type||Size Tank||Resin (Cu. Ft)||Carbon* (Cu. Ft)|
|PM-SS-SSWC-100||Softeners||10" x 35"||1||None|
|PM-SS-SSWCF-100||Softeners / Filters||10" x 35"||0.75||0.25|
Safeway Water Space Saver systems are manufactured using components manufactured in the United State of America and units are assembled in Ocala, Florida.
We are happy to provide quotations upon request. Please specify the products of interest and be sure to tell us where you reside. Water conditions vary, and we are happy to provide technical assistance.